• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to go in and out of the house at will is a great method to keep your pet physically active and mentally stimulated. A flap can aid in reducing accidents with toilets by making it easier for your cat flaps for french doors to leave the house when required.

Take a measurement of the door

A cat flap lets your pet to go and come as they please without having to open the door for them. This is a great method to keep your pet safe in the home when you are away or at home. It also helps keep unwanted pests from getting into your.

It is essential to measure the door prior to when you buy a cat flap since there are a variety of sizes available. This will ensure that you purchase the correct size that fits into your door made of upvc otherwise, it could be too small or too large, and your cat may be unable to use it.

Before you do anything however, you should use a ruler to determine the length of the door in various places along its edges. Also, you should take measurements of the door's height in a couple of places. This is because doors that are too high could cause your cat to do an exercise routine like a gymnast every time they need to use the flap!

Ask a glazier for help if you aren't sure what to measure for the door. They will be able determine whether your door is suitable for cat flaps and can give you advice on the right size flap to buy.

When you've got your measurements, the next thing to do is to draw the shape of the hole in the door. This will provide you with an outline to cutting the hole and will stop you from making a mistake that could cost you money in the long run!

You must also ensure that the hole you're creating is placed in the right spot. If you are fitting a cat flap in a upvc door a cat flap to the patio door, it is crucial that the hole does not get too close to the hinges. This could cause leakage or problems with the seal.

If you have a glass door, it might be best to leave this task to a glazier. It can be difficult to insert the cat flap onto an existing glass pane and you might find that the process causes it to crack and lose its weatherproof seal.

Measure the Cat

A cat flap lets your pet move around as they want without you having to leave him on his own. It also stops draughts from entering your home, which is not healthy for your cat as well as you.

However, if you own a uPVC or composite door cat flap door it could be a challenge to put in a cat flap. These doors are constructed of different materials and the installation is different. Make sure to inquire with the manufacturer to see if it is compatible prior to installing an uPVC cat flap on your uPVC composite or uPVC door. Modifications can invalidate warranties.

Generally speaking, these kinds of doors are made to be durable and tough with insulation included. This makes them more resistant to the elements of weather than other doors, but they may be a challenge to insert an animal flap. If you're uncertain about whether your uPVC or composite door can accommodate a cat flap, consult window with cat flap a professional joiner before beginning.

To make sure that your cat can get through the door, you'll need to determine their height. This will be easiest if they are sleeping or calm, so that they don't move around too much. Once you've established their height, take a measurement of the distance between their stomachs and the floor to determine where the bottom of the cat flap should go. You can then mark this position on the door.

If you are using power tools to cut your uPVC or composite door, you need be extra cautious. Drilling into metal can cause it crack, especially when the area is made of toughened glass. It is highly recommended to hire an experienced glass installer to install the cat flap inside the pane. This will stop the glass from shattering or becoming fragile. A glazier will also be able to provide you with a circular cat flap that is less likely to break and safer for your cat to use.

Cut the Hole

If not, you can make one yourself with a sheet of thin paper (tracing paper is ideal). If it doesn't, you could create your own with a thin piece of paper (tracing papers are ideal). After the shape is drawn in pencil on the door, then use a spirit level to ensure that the shape is horizontal. This will allow the cat flap to properly fit into the opening and prevent it being in a position to slide open or close.

Then, use your jigsaw to cut out the shape marked on the door. Make sure you are using a blade suitable for use on uPVC doors - usually it will be labelled accordingly however, if not, ask the staff at the DIY store for guidance. Once you have the hole cut out then place the flap against it and then push it out to ensure that the flap's movement is smooth. If it becomes stuck at any point, you can use a file or a sandpaper to correct this.

Also, make sure that there are no electric gas or cable lines within the door that you will be cutting through, because they could be damaged by your Jigsaw. Be aware of any handles, or other fixtures that are on the door which have to be removed in order to install the cat flap. Be cautious not to scratch these objects while cutting.

The majority of people who install a cat flap on their own will have an ordinary solid uPVC front door, meaning they won't have to deal with these issues. But, if your door is constructed of timber or has an ornamental panel that can't be removed then this will make it more difficult to complete the job.

For these kinds of jobs, it is recommended to seek out expert advice from a cat-flap fitter. It is important to do them correctly to avoid future problems. It is essential to get it right, as getting it wrong could damage the door and invalidate the warranty.

Place the Flap

Once you have cut your hole, place the flap and check if it opens and is able to fit. If you notice any spots that catch or stick to the door, smooth them out using an sandpaper or hand file until it is a perfect fit and opens without issue. Be sure that the flap is flush with the door.

Some kits include templates for this, but even if yours doesn't have a template, you can make use of a piece of thin paper instead - something similar to tracing paper. Lay the paper against the door and draw an area on which you'll need to position the flap (this will be your cutting guide). Mark four screw holes at each corner of the flap with the pencil marks you traced on the door. These will be the screws you'll need to use to fix the flap to the door.

The majority of uPVC door are solid and easy to cut. If your door is constructed of GRP or composite, it can be more difficult. If you are not familiar with this, it's best to hire an expert. They can also inform you if the door is suitable for the installation of the cat flap.

You can fit the cat flap onto composite doors but it's important to consult with the manufacturer or a professional joiner before you do so as any alterations to these types of doors may invalidate the warranty. If you choose to carry out the work yourself, be aware that this could be a messy and potentially dangerous task.

When you have composite doors, you'll usually require a grinder or saw to cut through the door's panel rather than simply through the GRP. Be aware that this can be very dangerous and you'll need to take great care not to damage the door or yourself since it is very fragile. It's worth noting that it's more difficult to cut the door glass than it is for a uPVC door or a solid wood door.