• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet come and go at their own pace without having to let him in or out. They can also help prevent your cat from toileting in the house.

It is simpler to install an animal flap on a upvc panel than a glass one, but you will need some skills and the appropriate tools.

Measure the Door

Installing a cat door into a front door can be difficult however, provided that the cat flap is of the correct one and you follow the directions it shouldn't be too difficult. We will be showing you how to draw the shape, using a jigsaw to cut out the area in the door and then finish the job by fixing the cat flap to the door. This will ensure that the flap stays in place and protects the door from rain and wind damaging the door.

The first thing to do is take a measurement of the width of your pet in order to get a precise measurement of the size of cat flap you will need. This will enable you to select a cat flap that is big enough to allow your pet to go into the home and exit without having to open the door every time.

Once you have the measurements you can mark the location on the door where the template should be placed. usually this is done with an X, but some kits come with a drawing that shows the location to drill, if yours does then stick it to the door and use a pencil to draw around the door. If your door has moulding or sill on the bottom edge of it ensure you have enough space to keep your cat safe and prevent them gaining access to your home.

Next put on your eye protection as well as a dust mask. Then using a jigsaw, begin cutting according to the lines you penciled in, don't try to push the blade too hard because this could make it cut faster than you would like it to. If you have a square that you have cut, use it to ensure whether you're cutting in the right way and to make sure the hole is in a rectangular shape. Once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without worrying about them coming in with a visitor, or leaving unwelcome gifts in the house. It also helps prevent draughts and keeps your home's temperature in check. However, putting the cat flap to your door could be an intimidating task for those who have never done it before, which is why many people to seek out a professional carpenter or joiner to do the job instead. This is a viable option, however you can do it yourself if the tools are right and the steps are adhered to.

While this is much simpler with a wooden back door with cat flap fitted, it is still possible in uPVC doors, but you need to be very careful not to scratch the doors since this could invalidate the warranty. First, you must measure the door to ensure that it can accommodate the new cat-flap. This isn't too difficult if you are using the standard uPVC door, but you may require more care if using an alternative type of door as these are more difficult to cut than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the amount of height between the floor and the bottom of your cat's stomach. It is important to locate a space on the door that allows your cat to comfortably pass through. Once you have the information, you'll be required to mark the space using a spirit level and a pencil so that you are certain that the opening will fit your cat.

After you have marked the area, it's time to cut the hole. You will need to use an jigsaw. It is important that you take your time to ensure that the cuts are smooth and straight, rather than uneven and rough, since it could cause damage to your door. Wear safety glasses and a dust mask while using a jigsaw. Inhaling sawdust can be harmful for your health. Once you have completed the cutting process, you will have to smooth the edges of the hole with sandpaper, so that the cat flap can be fitted easily in place.

Make a hole

It can be difficult to put the cat flap in upvc door panel flap onto a door panel or sealed double glazing unit. You might be tempted to do it yourself, but unless you have plenty of experience in DIY it is recommended to hire a professional to do the job for you. A botched job could not only be ugly but also pose security risks. It could allow cold air in when the cat is outdoors and hot air out when inside.

The first thing to do is mark out the position of the hole in the door with an eraser and an ax level. This will ensure that it is properly positioned and that it runs in a straight line with the other components of the door. Make sure to have sandpaper in your possession to smooth any rough edges.

Wear any safety gear you require when working with an electric tool. If you are worried about the sound of the jigsaw, you can purchase a cordless version which is quieter and simpler to use.

It is best to only remove the material that is required to fit the flap. It is necessary to leave a bit of material to make the wall thickness of the cat flap. However, removing too much can cause issues or even damage the frame of the door.

A door made of upvc may include a metal frame, or panel that could interfere with the microchip cat flap, and if this is the case you'll need to make an over-sized hole to ensure that the metal doesn't touch the wall of the cat flap, if this is done, it is crucial to fill in the oversize gap and make it watertight.

If you're planning to install a cat flap in a double-glazed or upvc window with frames made of metal you'll need to talk to a specialist. They can provide you with a new piece of glass that has the hole already made for the cat flap. It is cheaper to do this instead of trying to install the flap to an existing pane of glass that was not designed specifically for the purpose.

Fit the Flap

Cat flaps let your pet leave and come whenever they want, allowing them the freedom to lounge inside the house whenever they're feeling like it. However, if you own an uPVC door, it might be difficult to put in an animal flap, especially if you don't own glass panes that could be cut for one. If you're willing to install a half-glazed upvc door panel cat flap replacement panel, it's possible to install an additional cat flap. It's not just a matter of cutting an opening in the door. You'll also have to take a few steps to ensure that the door is safe.

A composite, uPVC or GRP door panel is typically made up of a plastic skin that is bonded to an insulating polystyrene base. The material is extremely fragile and care must be taken when cutting into it to avoid damaging. This kind of door typically has a template that you can use as a reference to cut the hole in the door.

Once you have marked the position of the hole in your door, now it's time to put in the cat flap itself. You can buy and fit a wide variety of different models that range from simple button operated ones to microchip activated units that only let in your pet. Whatever type of cat flap you pick, it's vital that your cat flap installer near me can use the flap comfortably without getting stuck outside in bad weather.

It's a good idea to opt for circular fittings rather than a square one, as circles can be more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking when drilling is applied to it. This is also a safer option because you won't need to drill into the toughened glass, which could break and hurt your pet or your family members. This is especially crucial if you have a child or elderly person at home who could be hurt by shards of glass.